docs updated

1 files changed, 0 insertions, 304 deletions

diff --git a/docs/install.md b/docs/install.md
deleted file mode 100644
index d032ad51..00000000
--- a/docs/install.md
+++ /dev/null
@@ -1,304 +0,0 @@
-Install Alice
-=============
-
-Here is a guide to installing Alice Linux on your computer using the chroot method. You can do this from your existing Linux distribution or from a live environment, such as Alice Live or another Linux distribution. Make sure your chosen environment has the necessary partitioning tools, filesystem tools, and extraction tools.
-
-Get Alice rootfs tarball
-------------------------
-
-Download the Alice rootfs tarball from the [download](https://alicelinux.org/download.html) page, along with its `sha256sum` file.
-```
-$ curl -O <url>
-$ curl -O <url>.sha256sum
-```
-
-Verify the checksum of the Alice rootfs tarball.
-```
-$ sha256sum -c alicelinux-rootfs-20240525.tar.xz.sha256sum
-alicelinux-rootfs-20240525.tar.xz: OK
-```
-
-Prepare the partition and filesystem
-------------------------------------
-
-Prepare the partition and filesystem of your choice. In this guide, I will use `ext4` as an example.
-```
-# cfdisk /dev/sdX
-# mkfs.ext4 /dev/sdXY
-```
-
-Mount your created partition somewhere. In this guide, I will use `/mnt/alice` as the mount point.
-```
-# mkdir /mnt/alice
-# mount /dev/sdXY /mnt/alice
-```
-
-Extract the Alice rootfs tarball
---------------------------------
-
-Extract the Alice rootfs into the mounted partition.
-```
-$ tar xvf alicelinux-rootfs-*.tar.xz -C /mnt/alice
-```
-
-Enter chroot
-------------
-
-First, chroot into Alice. (Replace `/mnt/alice` with your chosen mount point)
-```
-# /mnt/alice/usr/bin/apkg-chroot /mnt/alice
-```
-
-Any further commands after this will be executed inside the Alice environment. 
-
-Configure apkg
----------------
-
-Once we have the repositories cloned, we need to configure `apkg`. `apkg` is Alice's package build system (or package manager). `apkg` configuration is environment-based -- settings are exported as environment variables. Place them in `/etc/profile.d/apkg.sh` for system-wide configuration, or in `~/.profile` for per-user configuration.
-
-First, we set `CFLAGS` and `CXXFLAGS`. Alice base packages are built using `-O3 -march=x86-64 -pipe`. You can use these settings or change them to your preference.
-```
-# echo 'export CFLAGS="-O3 -march=x86-64 -pipe"' >> /etc/profile.d/apkg.sh
-```
-
-And use whats in `CFLAGS` for `CXXFLAGS`.
-```
-# echo 'export CXXFLAGS="$CFLAGS"' >> /etc/profile.d/apkg.sh
-```
-
-Next set `MAKEFLAGS`. I will use `6` for my `8 threads` machine.
-```
-# echo 'export MAKEFLAGS="-j6"' >> /etc/profile.d/apkg.sh
-```
-
-I'm also going to set `NINJAJOBS` here. Without it, `ninja` will use all threads of your machine when compiling.
-```
-# echo 'export NINJAJOBS="6"' >> /etc/profile.d/apkg.sh
-```
-
-Next, we need to set the package's build scripts path (I'll call it `package repos`) so `apkg` can find them. The `APKG_REPO` variable can accept multiple values for multiple `package repos`.
-
-Alice provides two (2) `package repos` (at the time of this writing): `core` and `extra`. `core` contains all base packages, and `extra` includes other packages beyond the base.
-
-I'm gonna use directory `/var/lib/repos/core` and `/var/lib/repos/extra` for `core` and `extra` repos respectively.
-```
-# echo 'export APKG_REPO="/var/lib/repos/core /var/lib/repos/extra"' >> /etc/profile.d/apkg.sh
-```
-
-You can also create a directory the community repo.
-> NOTE: The community repo is not held to the same standards as the official repos.
-> Additionally all repo paths must be declared in the APKG_REPO variable, separated by a single space.
-```
-# echo 'export APKG_REPO="/var/lib/repos/core /var/lib/repos/extra /var/lib/repos/community"' >> /etc/profile.d/apkg.sh
-```
-
-Next, we will set up directories for `packages`, `sources`, and `work`. By default, these directories are inside the package template, but we will change them to `/var/cache/pkg`, `/var/cache/src`, and `/var/cache/work` respectively. You can change these to any location where you want to store these files.
-
-First, create the directories.
-```
-# mkdir -p /var/cache/pkg
-# mkdir -p /var/cache/src
-# mkdir -p /var/cache/work
-```
-
-Then add these paths to `/etc/profile.d/apkg.sh`.
-```
-# echo 'export APKG_PACKAGE_DIR=/var/cache/pkg' >> /etc/profile.d/apkg.sh
-# echo 'export APKG_SOURCE_DIR=/var/cache/src' >> /etc/profile.d/apkg.sh
-# echo 'export APKG_WORK_DIR=/var/cache/work' >> /etc/profile.d/apkg.sh
-```
-
-Configure reposync
---------------------
-
-`reposync` is a tool to sync package templates from git repositories. Like `apkg`, `reposync` configuration is environment-based. Add remote repos for `core` and `extra` to `/etc/profile.d/reposync.sh` (system-wide) or `~/.profile` (per-user). The format is `<gitrepo>|<branch>|<localpath>`.
-```
-# echo 'export REPOSYNC_CORE="https://codeberg.org/emmett1/alicelinux|core|/var/lib/repos/core"' >> /etc/profile.d/reposync.sh
-# echo 'export REPOSYNC_EXTRA="https://codeberg.org/emmett1/alicelinux|extra|/var/lib/repos/extra"' >> /etc/profile.d/reposync.sh
-```
-
-If you also want the community repo, add it as well.
-> NOTE: The community repo is not held to the same standards as the official repos.
-```
-# echo 'export REPOSYNC_COMMUNITY="https://codeberg.org/emmett1/alicelinux|community|/var/lib/repos/community"' >> /etc/profile.d/reposync.sh
-```
-
-
-Now run `reposync` to sync latest package templates.
-```
-# reposync
-```
- 
-After setting up our `package repos`, make sure `apkg` can find the packages. We can use `apkg -s <pattern>` to search for packages.
-```
-# apkg -s sway
-swayidle
-swaybg
-swaylock
-sway
-```
-
-Lets combine with `-p` flags to show path or package templates.
-```
-# apkg -p $(apkg -s sway)
-/var/lib/repos/extra/sway
-/var/lib/repos/extra/swaylock
-/var/lib/repos/extra/swaybg
-/var/lib/repos/extra/swayidle
-```
-
-If the output appears, then we are good to go.
-
-Full system upgrade/rebuild
----------------------------
-
-On the first install, we should upgrade the system first.
-
-Before we do, install development packages first.
-```
-# apkg -I meson cmake pkgconf libtool automake perl
-```
-
-> NOTE: use uppercase 'i' for solve dependencies, lowercase 'i' without solve dependencies.
-
-Now lets upgrade our system.
-```
-# apkg -U
-```
-
-> NOTE: Use uppercase `U` for a system upgrade, and lowercase `u` to upgrade a specific package of your choice.
-
-If you changed `CFLAGS` and `CXXFLAGS` to something other than the default, it's a good time to perform a full rebuild first. In this case, you can skip upgrading the system because performing a full rebuild will already use the latest version in `package repos`.
-```
-# apkg -u $(apkg -a)
-```
-
-> NOTE: Add the `-f` flag to force rebuild of existing prebuilt package.
-> NOTE: `apkg -a` prints all installed packages on the system.
-
-Install kernel
---------------
-
-You can configure your own kernel from [kernel.org](https://kernel.org/) or use the one provided by Alice.
-
-> NOTE: The provided kernel will take a lot of time to compile because many options are enabled.
-
-If you want to use Alice's kernel, just run.
-```
-# apkg -I linux
-```
-
-Install firmware
-----------------
-
-If your hardware requires firmware, install it using.
-```
-# apkg -I linux-firmware
-```
-
-Hostname
---------
-
-Change `alice` to the hostname of your choice.
-```
-# echo alice > /etc/hostname
-```
-
-Fstab
------
-
-Change the partition and filesystem of your choice below.
-```
-# echo '/dev/sda1 swap swap defaults 0 1' >> /etc/fstab
-# echo '/dev/sda2 / ext4 defaults 0 0' >> /etc/fstab
-```
-
-Enable runit services
----------------------
-
-Alice uses busybox's `runit` as its main service manager. Enable the required services.
-```
-# ln -s /etc/sv/tty1 /var/service
-# ln -s /etc/sv/tty2 /var/service
-# ln -s /etc/sv/tty3 /var/service
-```
-
-I'm enabling 3 `tty` services. `tty` is required; without it, you won't be able to log in (or run any commands).
-
-> The runit service directory is `/etc/sv`.
-> Create a symlink from `/etc/sv/<service>` to `/var/service` to enable it; remove the symlink to disable it.
-
-Setup user and password
------------------------
-
-Add your user.
-```
-# adduser <user>
-```
-
-Add your user to the `wheel` group.
-```
-# adduser <user> wheel
-```
-
-You might need to add your user to the `input` and `video` groups to start the Wayland compositor later, and the `audio` group to have working audio.
-```
-# adduser <user> input
-# adduser <user> video
-# adduser <user> audio
-```
-
-Root password
--------------
-
-Set the password for the `root` user.
-```
-# passwd
-```
-
-Timezone
---------
-
-Install `tzdata`.
-```
-# apkg -I tzdata
-```
-
-Then create a symlink for your timezone to `/etc/localtime`.
-```
-# ln -s /usr/share/zoneinfo/Asia/Kuala_Lumpur /etc/localtime
-```
-
-Alternatively, you can copy it and then uninstall `tzdata` to keep your installed packages minimal.
-```
-# cp /usr/share/zoneinfo/Asia/Kuala_Lumpur /etc/localtime
-# apkg -r tzdata
-```
-
-Install bootloader
-------------------
-
-See the [bootloader documentation](bootloader.html) for installing and configuring a bootloader.
-
-Networking
-----------
-
-See the [networking documentation](networking.html) for setting up networking.
-
-Reboot and enjoy!
------------------
-
-Exit the chroot environment and unmount the Alice partition, then reboot.
-```
-# exit
-# umount /mnt/alice
-# reboot
-```
-
-Some important notes
-====================
-
-- `Alice` uses `spm` and `apkg` as its package manager and package build system. Run with the `-h` flag to see available options.
-- Additional scripts are provided with the name `apkg-<script>` which will be added (or removed) from time to time.
-- Use `revdep` to scan for broken libraries and binaries after system upgrades and package removals. You can use `revdep -v` to print out missing required libraries, and use `apkg -f -u $(revdep)` to scan and rebuild broken packages.
-- Run `updateconf` to update config files in `/etc` after package upgrades.