alicelinux

A lightweight musl + clang/llvm + libressl + busybox distro
git clone https://codeberg.org/emmett1/alicelinux
Log | Files | Refs | README | LICENSE

make.sh (7572B)


      1 #!/bin/sh 
      2 # Copyright 2009 The Go Authors. All rights reserved.
      3 # Use of this source code is governed by a BSD-style
      4 # license that can be found in the LICENSE file.
      5 
      6 # See golang.org/s/go15bootstrap for an overview of the build process.
      7 
      8 # Environment variables that control make.sh:
      9 #
     10 # GOHOSTARCH: The architecture for host tools (compilers and
     11 # binaries).  Binaries of this type must be executable on the current
     12 # system, so the only common reason to set this is to set
     13 # GOHOSTARCH=386 on an amd64 machine.
     14 #
     15 # GOARCH: The target architecture for installed packages and tools.
     16 #
     17 # GOOS: The target operating system for installed packages and tools.
     18 #
     19 # GO_GCFLAGS: Additional go tool compile arguments to use when
     20 # building the packages and commands.
     21 #
     22 # GO_LDFLAGS: Additional go tool link arguments to use when
     23 # building the commands.
     24 #
     25 # CGO_ENABLED: Controls cgo usage during the build. Set it to 1
     26 # to include all cgo related files, .c and .go file with "cgo"
     27 # build directive, in the build. Set it to 0 to ignore them.
     28 #
     29 # GO_EXTLINK_ENABLED: Set to 1 to invoke the host linker when building
     30 # packages that use cgo.  Set to 0 to do all linking internally.  This
     31 # controls the default behavior of the linker's -linkmode option.  The
     32 # default value depends on the system.
     33 #
     34 # GO_LDSO: Sets the default dynamic linker/loader (ld.so) to be used
     35 # by the internal linker.
     36 #
     37 # CC: Command line to run to compile C code for GOHOSTARCH.
     38 # Default is "gcc". Also supported: "clang".
     39 #
     40 # CC_FOR_TARGET: Command line to run to compile C code for GOARCH.
     41 # This is used by cgo. Default is CC.
     42 #
     43 # CC_FOR_${GOOS}_${GOARCH}: Command line to run to compile C code for specified ${GOOS} and ${GOARCH}.
     44 # (for example, CC_FOR_linux_arm)
     45 # If this is not set, the build will use CC_FOR_TARGET if appropriate, or CC.
     46 #
     47 # CXX_FOR_TARGET: Command line to run to compile C++ code for GOARCH.
     48 # This is used by cgo. Default is CXX, or, if that is not set,
     49 # "g++" or "clang++".
     50 #
     51 # CXX_FOR_${GOOS}_${GOARCH}: Command line to run to compile C++ code for specified ${GOOS} and ${GOARCH}.
     52 # (for example, CXX_FOR_linux_arm)
     53 # If this is not set, the build will use CXX_FOR_TARGET if appropriate, or CXX.
     54 #
     55 # FC: Command line to run to compile Fortran code for GOARCH.
     56 # This is used by cgo. Default is "gfortran".
     57 #
     58 # PKG_CONFIG: Path to pkg-config tool. Default is "pkg-config".
     59 #
     60 # GO_DISTFLAGS: extra flags to provide to "dist bootstrap".
     61 # (Or just pass them to the make.sh command line.)
     62 #
     63 # GOBUILDTIMELOGFILE: If set, make.sh and all.bash write
     64 # timing information to this file. Useful for profiling where the
     65 # time goes when these scripts run.
     66 #
     67 # GOROOT_BOOTSTRAP: A working Go tree >= Go 1.22.6 for bootstrap.
     68 # If $GOROOT_BOOTSTRAP/bin/go is missing, $(go env GOROOT) is
     69 # tried for all "go" in $PATH. By default, one of $HOME/go1.22.6,
     70 # $HOME/sdk/go1.22.6, or $HOME/go1.4, whichever exists, in that order.
     71 # We still check $HOME/go1.4 to allow for build scripts that still hard-code
     72 # that name even though they put newer Go toolchains there.
     73 
     74 bootgo=1.22.6
     75 
     76 set -e
     77 
     78 if [ ! -f run.bash ]; then
     79 	echo 'make.sh must be run from $GOROOT/src' 1>&2
     80 	exit 1
     81 fi
     82 
     83 if [ "$GOBUILDTIMELOGFILE" != "" ]; then
     84 	echo $(LC_TIME=C date) start make.sh >"$GOBUILDTIMELOGFILE"
     85 fi
     86 
     87 # Test for Windows.
     88 case "$(uname)" in
     89 *MINGW* | *WIN32* | *CYGWIN*)
     90 	echo 'ERROR: Do not use make.sh to build on Windows.'
     91 	echo 'Use make.bat instead.'
     92 	echo
     93 	exit 1
     94 	;;
     95 esac
     96 
     97 # Test for bad ld.
     98 if ld --version 2>&1 | grep 'gold.* 2\.20' >/dev/null; then
     99 	echo 'ERROR: Your system has gold 2.20 installed.'
    100 	echo 'This version is shipped by Ubuntu even though'
    101 	echo 'it is known not to work on Ubuntu.'
    102 	echo 'Binaries built with this linker are likely to fail in mysterious ways.'
    103 	echo
    104 	echo 'Run sudo apt-get remove binutils-gold.'
    105 	echo
    106 	exit 1
    107 fi
    108 
    109 # Test for bad SELinux.
    110 # On Fedora 16 the selinux filesystem is mounted at /sys/fs/selinux,
    111 # so loop through the possible selinux mount points.
    112 for se_mount in /selinux /sys/fs/selinux
    113 do
    114 	if [ -d $se_mount ] && [ -f $se_mount/booleans/allow_execstack ] && [ -x /usr/sbin/selinuxenabled ] && /usr/sbin/selinuxenabled; then
    115 		if ! cat $se_mount/booleans/allow_execstack | grep -c '^1 1$' >> /dev/null ; then
    116 			echo "WARNING: the default SELinux policy on, at least, Fedora 12 breaks "
    117 			echo "Go. You can enable the features that Go needs via the following "
    118 			echo "command (as root):"
    119 			echo "  # setsebool -P allow_execstack 1"
    120 			echo
    121 			echo "Note that this affects your system globally! "
    122 			echo
    123 			echo "The build will continue in five seconds in case we "
    124 			echo "misdiagnosed the issue..."
    125 
    126 			sleep 5
    127 		fi
    128 	fi
    129 done
    130 
    131 # Clean old generated file that will cause problems in the build.
    132 rm -f ./runtime/runtime_defs.go
    133 
    134 # Finally!  Run the build.
    135 
    136 verbose=false
    137 vflag=""
    138 if [ "$1" = "-v" ]; then
    139 	verbose=true
    140 	vflag=-v
    141 	shift
    142 fi
    143 
    144 goroot_bootstrap_set=${GOROOT_BOOTSTRAP+"true"}
    145 if [ -z "$GOROOT_BOOTSTRAP" ]; then
    146 	GOROOT_BOOTSTRAP="$HOME/go1.4"
    147 	for d in sdk/go$bootgo go$bootgo; do
    148 		if [ -d "$HOME/$d" ]; then
    149 			GOROOT_BOOTSTRAP="$HOME/$d"
    150 		fi
    151 	done
    152 fi
    153 export GOROOT_BOOTSTRAP
    154 
    155 bootstrapenv() {
    156 	GOROOT="$GOROOT_BOOTSTRAP" GO111MODULE=off GOENV=off GOOS= GOARCH= GOEXPERIMENT= GOFLAGS= "$@"
    157 }
    158 
    159 export GOROOT="$(cd .. && pwd)"
    160 IFS=$'\n'; for go_exe in $(command -v go); do
    161 	if [ ! -x "$GOROOT_BOOTSTRAP/bin/go" ]; then
    162 		goroot_bootstrap=$GOROOT_BOOTSTRAP
    163 		GOROOT_BOOTSTRAP=""
    164 		goroot=$(bootstrapenv "$go_exe" env GOROOT)
    165 		GOROOT_BOOTSTRAP=$goroot_bootstrap
    166 		if [ "$goroot" != "$GOROOT" ]; then
    167 			if [ "$goroot_bootstrap_set" = "true" ]; then
    168 				printf 'WARNING: %s does not exist, found %s from env\n' "$GOROOT_BOOTSTRAP/bin/go" "$go_exe" >&2
    169 				printf 'WARNING: set %s as GOROOT_BOOTSTRAP\n' "$goroot" >&2
    170 			fi
    171 			GOROOT_BOOTSTRAP="$goroot"
    172 		fi
    173 	fi
    174 done; unset IFS
    175 if [ ! -x "$GOROOT_BOOTSTRAP/bin/go" ]; then
    176 	echo "ERROR: Cannot find $GOROOT_BOOTSTRAP/bin/go." >&2
    177 	echo "Set \$GOROOT_BOOTSTRAP to a working Go tree >= Go $bootgo." >&2
    178 	exit 1
    179 fi
    180 # Get the exact bootstrap toolchain version to help with debugging.
    181 # We clear GOOS and GOARCH to avoid an ominous but harmless warning if
    182 # the bootstrap doesn't support them.
    183 GOROOT_BOOTSTRAP_VERSION=$(bootstrapenv "$GOROOT_BOOTSTRAP/bin/go" version | sed 's/go version //')
    184 echo "Building Go cmd/dist using $GOROOT_BOOTSTRAP. ($GOROOT_BOOTSTRAP_VERSION)"
    185 if $verbose; then
    186 	echo cmd/dist
    187 fi
    188 if [ "$GOROOT_BOOTSTRAP" = "$GOROOT" ]; then
    189 	echo "ERROR: \$GOROOT_BOOTSTRAP must not be set to \$GOROOT" >&2
    190 	echo "Set \$GOROOT_BOOTSTRAP to a working Go tree >= Go $bootgo." >&2
    191 	exit 1
    192 fi
    193 rm -f cmd/dist/dist
    194 bootstrapenv "$GOROOT_BOOTSTRAP/bin/go" build -o cmd/dist/dist ./cmd/dist
    195 
    196 # -e doesn't propagate out of eval, so check success by hand.
    197 eval $(./cmd/dist/dist env -p || echo FAIL=true)
    198 if [ "$FAIL" = true ]; then
    199 	exit 1
    200 fi
    201 
    202 if $verbose; then
    203 	echo
    204 fi
    205 
    206 if [ "$1" = "--dist-tool" ]; then
    207 	# Stop after building dist tool.
    208 	mkdir -p "$GOTOOLDIR"
    209 	if [ "$2" != "" ]; then
    210 		cp cmd/dist/dist "$2"
    211 	fi
    212 	mv cmd/dist/dist "$GOTOOLDIR"/dist
    213 	exit 0
    214 fi
    215 
    216 # Run dist bootstrap to complete make.sh.
    217 # Bootstrap installs a proper cmd/dist, built with the new toolchain.
    218 # Throw ours, built with the bootstrap toolchain, away after bootstrap.
    219 ./cmd/dist/dist bootstrap -a $vflag $GO_DISTFLAGS "$@"
    220 rm -f ./cmd/dist/dist
    221 
    222 # DO NOT ADD ANY NEW CODE HERE.
    223 # The bootstrap+rm above are the final step of make.sh.
    224 # If something must be added, add it to cmd/dist's cmdbootstrap,
    225 # to avoid needing three copies in three different shell languages
    226 # (make.sh, make.bat, make.rc).