From dea2a1fa20fc8e843cd85e5920a67b9054d00b2e Mon Sep 17 00:00:00 2001 From: Woodpecker CI Date: Sun, 24 May 2026 15:40:32 +0000 Subject: Woodpecker CI ef5bfeb93345a5a681d88e99775622bf28defd8d [SKIP CI] --- docs/install.md | 320 -------------------------------------- docs/networking.md | 211 ------------------------- docs/packagemanager.md | 414 ------------------------------------------------- docs/readme.md | 6 - 4 files changed, 951 deletions(-) delete mode 100644 docs/install.md delete mode 100644 docs/networking.md delete mode 100644 docs/packagemanager.md delete mode 100644 docs/readme.md (limited to 'docs') diff --git a/docs/install.md b/docs/install.md deleted file mode 100644 index 923d76f7..00000000 --- a/docs/install.md +++ /dev/null @@ -1,320 +0,0 @@ -Install Alice -============= - -Here is a guide to installing Alice Linux on your computer using the chroot method. You can do this from your existing Linux distribution or from a live environment, such as Alice Live or another Linux distribution. Make sure your chosen environment has the necessary partitioning tools, filesystem tools, and extraction tools. - -Get Alice rootfs tarball ------------------------- - -Download the Alice rootfs tarball from the [release](https://codeberg.org/emmett1/alicelinux/releases) page, along with its `sha256sum` file. -``` -$ curl -O -$ curl -O .sha256sum -``` - -Verify the checksum of the Alice rootfs tarball. -``` -$ sha256sum -c alicelinux-rootfs-20240525.tar.xz.sha256sum -alicelinux-rootfs-20240525.tar.xz: OK -``` - -Prepare the partition and filesystem ------------------------------------- - -Prepare the partition and filesystem of your choice. In this guide, I will use `ext4` as an example. -``` -# cfdisk /dev/sdX -# mkfs.ext4 /dev/sdXY -``` - -Mount your created partition somewhere. In this guide, I will use `/mnt/alice` as the mount point. -``` -# mkdir /mnt/alice -# mount /dev/sdXY /mnt/alice -``` - -Extract the Alice rootfs tarball --------------------------------- - -Extract the Alice rootfs into the mounted partition. -``` -$ tar xvf alicelinux-rootfs-*.tar.xz -C /mnt/alice -``` - -Enter chroot ------------- - -First, chroot into Alice. (Replace `/mnt/alice` with your chosen mount point) -``` -# /mnt/alice/usr/bin/apkg-chroot /mnt/alice -``` - -Any further commands after this will be executed inside the Alice environment. - -Configure apkg.conf -------------------- - -Once we have the repositories cloned, we need to configure `apkg`. `apkg` is Alice's package build system (or package manager). By default, Alice does not provide an `apkg` config file (yes, `apkg` can work without a config file), but we need to create one. The `apkg` config file should be located at `/etc/apkg.conf` by default. Let's create one. - -First, we set `CFLAGS` and `CXXFLAGS`. Alice base packages are built using `-O3 -march=x86-64 -pipe`. You can use these settings or change them to your preference. -``` -# echo 'export CFLAGS="-O3 -march=x86-64 -pipe"' >> /etc/apkg.conf -``` - -And use whats in `CFLAGS` for `CXXFLAGS`. -``` -# echo 'export CXXFLAGS="$CFLAGS"' >> /etc/apkg.conf -``` - -Next set `MAKEFLAGS`. I will use `6` for my `8 threads` machine. -``` -# echo 'export MAKEFLAGS="-j6"' >> /etc/apkg.conf -``` - -I'm also going to set `NINJAJOBS` here. Without it, `ninja` will use all threads of your machine when compiling. -``` -# echo 'export NINJAJOBS="6"' >> /etc/apkg.conf -``` - -Next, we need to set the package's build scripts path (I'll call it `package repos`) so `apkg` can find them. The `APKG_REPO` variable can accept multiple values for multiple `package repos`. - -Alice provides two (2) `package repos` (at the time of this writing): `core` and `extra`. `core` contains all base packages, and `extra` includes other packages beyond the base. - -I'm gonna use directory `/var/lib/repos/core` and `/var/lib/repos/extra` for `core` and `extra` repos respectively. -``` -# echo 'APKG_REPO="/var/lib/repos/core /var/lib/repos/extra"' >> /etc/apkg.conf -``` - -> NOTE: All repo paths must be declared in the APKG_REPO variable, separated by a single space. - -Next, we will set up directories for `packages`, `sources`, and `work`. By default, these directories are inside the package template, but we will change them to `/var/cache/pkg`, `/var/cache/src`, and `/var/cache/work` respectively. You can change these to any location where you want to store these files. - -First, create the directories. -``` -# mkdir -p /var/cache/pkg -# mkdir -p /var/cache/src -# mkdir -p /var/cache/work -``` - -Then add these paths to `/etc/apkg.conf`. -``` -# echo 'APKG_PACKAGE_DIR=/var/cache/pkg' >> /etc/apkg.conf -# echo 'APKG_SOURCE_DIR=/var/cache/src' >> /etc/apkg.conf -# echo 'APKG_WORK_DIR=/var/cache/work' >> /etc/apkg.conf -``` - -Configure reposync.conf ------------------------ - -`reposync` is a tool to sync package templates from git repositories. Add remote repos for `core` and `extra` into `/etc/reposync.conf`. The format of remote repos in `reposync.conf` is `||`. -``` -# echo 'https://codeberg.org/emmett1/alicelinux|core|/var/lib/repos/core' >> /etc/reposync.conf -# echo 'https://codeberg.org/emmett1/alicelinux|extra|/var/lib/repos/extra' >> /etc/reposync.conf -``` - -Now run `reposync` to sync latest package templates. -``` -# reposync -``` - -After setting up our `package repos`, make sure `apkg` can find the packages. We can use `apkg -s ` to search for packages. -``` -# apkg -s sway -swayidle -swaybg -swaylock -sway -``` - -Lets combine with `-p` flags to show path or package templates. -``` -# apkg -p $(apkg -s sway) -/var/lib/repos/extra/sway -/var/lib/repos/extra/swaylock -/var/lib/repos/extra/swaybg -/var/lib/repos/extra/swayidle -``` - -If the output appears, then we are good to go. - -Full system upgrade/rebuild ---------------------------- - -On the first install, we should upgrade the system first. - -Before we do, install development packages first. -``` -# apkg -I meson cmake pkgconf libtool automake perl -``` - -> NOTE: use upppercase 'i' for solve dependencies, lowecase 'i' without solve dependencies. - -Now lets upgrade our system. -``` -# apkg -U -``` - -> NOTE: Use uppercase `U` for a system upgrade, and lowercase `u` to upgrade a specific package of your choice. - -If you changed `CFLAGS` and `CXXFLAGS` to something other than the default, it's a good time to perform a full rebuild first. In this case, you can skip upgrading the system because performing a full rebuild will already use the latest version in `package repos`. -``` -# apkg -u $(apkg -a) -``` - -> NOTE: Add the `-f` flag to force rebuild of existing prebuilt package. -> NOTE: `apkg -a` prints all installed packages on the system. - -Install kernel --------------- - -You can configure your own kernel from [kernel.org](https://kernel.org/) or use the one provided by Alice. - -> NOTE: The provided kernel will take a lot of time to compile because many options are enabled. - -If you want to use Alice's kernel, just run. -``` -# apkg -I linux -``` - -Install firmware ----------------- - -If your hardware requires firmware, install it using. -``` -# apkg -I linux-firmware -``` - -Install bootloader ------------------- - -In this guide, I'm going to use `grub` as the bootloader. Install `grub`. -``` -# apkg -I grub -``` - -Then generate grub config. -``` -# grub-install /dev/sdX -# grub-mkconfig -o /boot/grub/grub.cfg -``` - -Hostname --------- - -Change `alice` to the hostname of your choice. -``` -# echo alice > /etc/hostname -``` - -Fstab ------ - -Change the partition and filesystem of your choice below. -``` -# echo '/dev/sda1 swap swap defaults 0 1' >> /etc/fstab -# echo '/dev/sda2 / ext4 defaults 0 0' >> /etc/fstab -``` - -Enable runit services ---------------------- - -Alice uses busybox's `runit` as its main service manager. Enable the required services. -``` -# ln -s /etc/sv/tty1 /var/service -# ln -s /etc/sv/tty2 /var/service -# ln -s /etc/sv/tty3 /var/service -``` - -I'm enabling 3 `tty` services. `tty` is required; without it, you won't be able to log in (or run any commands). - -> The runit service directory is `/etc/sv`. -> Create a symlink from `/etc/sv/` to `/var/service` to enable it; remove the symlink to disable it. - -Setup user and password ------------------------ - -Add your user. -``` -# adduser -``` - -Add your user to the `wheel` group. -``` -# adduser wheel -``` - -You might need to add your user to the `input` and `video` groups to start the Wayland compositor later, and the `audio` group to have working audio. -``` -# adduser input -# adduser video -# adduser audio -``` - -Root password -------------- - -Set the password for the `root` user. -``` -# passwd -``` - -Networking ----------- - -You might want to set up networking before rebooting. For wifi connection, install `wpa_supplicant`. -``` -# apkg -I wpa_supplicant -``` - -Configure your SSID. -``` -# wpa_passphrase >> /etc/wpa_supplicant.conf -``` - -Enable the service. -``` -# ln -s /etc/sv/wpa_supplicant /var/service -``` - -Then configure & enable `udhcpc` service. -``` -# vi /etc/sv/udhcpc/conf -# ln -s /etc/sv/udhcpc /var/service -``` - -Timezone --------- - -Install `tzdata`. -``` -# apkg -I tzdata -``` - -Then create a symlink for your timezone to `/etc/localtime`. -``` -# ln -s /usr/share/zoneinfo/Asia/Kuala_Lumpur /etc/localtime -``` - -Alternatively, you can copy it and then uninstall `tzdata` to keep your installed packages minimal. -``` -# cp /usr/share/zoneinfo/Asia/Kuala_Lumpur /etc/localtime -# apkg -r tzdata -``` - -Reboot and enjoy! ------------------ - -Exit the chroot environment and unmount the Alice partition, then reboot. -``` -# exit -# umount /mnt/alice -# reboot -``` - -Some important notes -==================== - -- `Alice` uses `spm` and `apkg` as its package manager and package build system. Run with the `-h` flag to see available options. -- Additional scripts are provided with the name `apkg-