diff options
Diffstat (limited to 'docs/install.md')
| -rw-r--r-- | docs/install.md | 243 |
1 files changed, 0 insertions, 243 deletions
diff --git a/docs/install.md b/docs/install.md deleted file mode 100644 index e6669e2c..00000000 --- a/docs/install.md +++ /dev/null @@ -1,243 +0,0 @@ -## Install Alice -Here is a guide to installing Alice Linux on your computer using the chroot method. You can do this from your existing Linux distribution or from a live environment, such as Alice Live or another Linux distribution. Make sure your chosen environment has the necessary partitioning tools, filesystem tools, and extraction tools. - -### Get Alice rootfs tarball -Download the Alice rootfs tarball from the [release](https://codeberg.org/emmett1/alicelinux/releases) page, along with its `sha256sum` file. -``` -$ curl -O <url> -$ curl -O <url>.sha256sum -``` -Verify the checksum of the Alice rootfs tarball: -``` -$ sha256sum -c alicelinux-rootfs-20240525.tar.xz.sha256sum -``` -Make sure it prints: -``` -alicelinux-rootfs-20240525.tar.xz: OK -``` - -### Prepare the partition and filesystem -Prepare the partition and filesystem of your choice. In this guide, I will use ext4 as an example. -``` -# cfdisk /dev/sdX -# mkfs.ext4 /dev/sdXY -``` -Mount your created partition somewhere. In this guide, I will use /mnt/alice as the mount point. -``` -# mkdir /mnt/alice -# mount /dev/sdXY /mnt/alice -``` - -### Extract the Alice rootfs tarball -Extract the Alice rootfs into the mounted partition. -``` -$ tar xvf alicelinux-rootfs-*.tar.xz -C /mnt/alice -``` - -### Enter chroot -First, chroot into Alice. (Replace /mnt/alice with your chosen mount point.) -``` -# /mnt/alice/usr/bin/apkg-chroot /mnt/alice -``` -Any further commands after this will be executed inside the Alice environment. - -### Clone Alice repos -Fetch the Alice packages repositories somewhere. I'll fetch them inside the /var/lib directory to keep the system clean. -``` -# cd /var/lib -# git clone --depth=1 https://codeberg.org/emmett1/alicelinux -``` -Once we have the repositories cloned, we need to configure `apkg`. `apkg` is Alice's package build system (or package manager). By default, Alice does not provide an `apkg` config file (yes, `apkg` can work without a config file), but we need to create one. The `apkg` config file should be located at `/etc/apkg.conf` by default. Let's create one. - -### Configure apkg.conf - -First, we set `CFLAGS` and `CXXFLAGS`. Alice base packages are built using `-O3 -march=x86-64 -pipe`. You can use these settings or change them to your preference. -``` -# echo 'export CFLAGS="-O3 -march=x86-64 -pipe"' >> /etc/apkg.conf -``` -And use whats in `CFLAGS` for `CXXFLAGS`. -``` -# echo 'export CXXFLAGS="$CFLAGS"' >> /etc/apkg.conf -``` -Next set `MAKEFLAGS`. I will use `6` for my `8 threads` machine. -``` -# echo 'export MAKEFLAGS="-j6"' >> /etc/apkg.conf -``` -I'm also going to set `NINJAJOBS` here. Without it, `ninja` will use all threads of your machine when compiling. -``` -# echo 'export NINJAJOBS="6"' >> /etc/apkg.conf -``` -Next, we need to set the package's build scripts path (I'll call it `package repos`) so `apkg` can find them. The `APKG_REPO` variable can accept multiple values for multiple `package repos`. - -Alice provides four (4) `package repos` (at the time of this writing): `core`, `extra`, `xorg` and `wayland`. `core` contains all base packages, and `extra` includes other packages beyond the base. `xorg` and `wayland` contain packages for gui and their dependencies. - -First, get the absolute path of the `package repos` where we cloned them. By the way, we are still inside the `/var/lib` directory where we cloned the repo. ->NOTE: USE TAB COMPLETION! -``` -# realpath alicelinux/repos/core -/var/lib/alicelinux/repos/core -# realpath alicelinux/repos/extra -/var/lib/alicelinux/repos/extra -``` -After we have the path of our `package repos`, add it to the `APKG_REPO` variable in `/etc/apkg.conf`. -``` -# echo 'APKG_REPO="/var/lib/alicelinux/repos/core /var/lib/alicelinux/repos/extra"' >> /etc/apkg.conf -``` ->NOTE: All repo paths must be declared in the APKG_REPO variable, seperated by a single space. - -After setting up our `package repos`, make sure `apkg` can find the packages. We can use `apkg -s <pattern>` to search for packages. -``` -# apkg -s sway -swayidle -swaybg -swaylock -sway -``` -If the output appears, then we are good to go. - -Next, we will set up directories for `packages`, `sources`, and `work`. By default, these directories are inside the package template, but we will change them to `/var/cache/pkg`, `/var/cache/src`, and `/var/cache/work` respectively. You can change these to any location where you want to store these files. - -First, create the directories: -``` -# mkdir -p /var/cache/pkg -# mkdir -p /var/cache/src -# mkdir -p /var/cache/work -``` - -Then add these paths to `/etc/apkg.conf`. -``` -# echo 'APKG_PACKAGE_DIR=/var/cache/pkg' >> /etc/apkg.conf -# echo 'APKG_SOURCE_DIR=/var/cache/src' >> /etc/apkg.conf -# echo 'APKG_WORK_DIR=/var/cache/work' >> /etc/apkg.conf -``` -### Full system upgrade/rebuild -On the first install, we should upgrade the system first. -> Use uppercase `U` for a system upgrade, and lowercase `u` to upgrade a specific package of your choice. -``` -# apkg -U -``` -If you changed `CFLAGS` and `CXXFLAGS` to something other than the default, it's a good time to perform a full rebuild first. In this case, you can skip upgrading the system because performing a full rebuild will already use the latest version in `package repos`. - -> Add the `-f` flag to force rebuild of existing prebuilt package. -> `apkg -a` prints all installed packages on the system. -``` -# apkg -u $(apkg -a) -``` -### Install development packages -Before installing any additional packages, we need to install development packages. -``` -# apkg -I meson cmake pkgconf libtool automake perl -``` -### Install kernel -You can configure your own kernel from [kernel.org](https://kernel.org/) or use the one provided by Alice. -> The provided kernel will take a lot of time to compile because many options are enabled. - -If you want to use Alice's kernel, just run: -``` -# apkg -I linux -``` -### Install firmware -If your hardware requires firmware, install it using: -``` -# apkg -I linux-firmware linux-firmware-nvidia -``` - -### Install bootloader -In this guide, I'm going to use `grub` as the bootloader. Install `grub`: -``` -# apkg -I grub -``` -Then generate grub config: -``` -# grub-install /dev/sdX -# grub-mkconfig -o /boot/grub/grub.cfg -``` - -### Hostname -Change `alice` to the hostname of your choice. -``` -# echo alice > /etc/hostname -``` - -### Fstab -Change the partition and filesystem of your choice below: -``` -# echo '/dev/sda1 swap swap defaults 0 1' >> /etc/fstab -# echo '/dev/sda2 / ext4 defaults 0 0' >> /etc/fstab -``` -### Enable runit services -Alice uses busybox's `runit` as its main service manager. Enable the required services: -``` -# ln -s /etc/sv/tty1 /var/service -# ln -s /etc/sv/tty2 /var/service -# ln -s /etc/sv/tty3 /var/service -``` -I'm enabling 3 `tty` services. `tty` is required; without it, you won't be able to log in (or run any commands). -> The runit service directory is `/etc/sv`. -> Create a symlink from `/etc/sv/<service>` to `/var/service` to enable it; remove the symlink to disable it. - -### Setup user and password -Add your user: -``` -# adduser <user> -``` -Add your user to the `wheel` group: -``` -# adduser <user> wheel -``` -You might need to add your user to the `input` and `video` groups to start the Wayland compositor later, and the `audio` group to have working audio: -``` -# adduser <user> input -# adduser <user> video -# adduser <user> audio -``` - -### Root password -Set the password for the `root` user: -``` -# passwd -``` - -### Networking -You might want to set up networking before rebooting. Use `wpa_supplicant` and `dhcpcd`. -``` -# apkg -I wpa_supplicant dhcpcd -``` -Configure your SSID: -``` -# wpa_passphrase <YOUR SSID> <ITS PASSWORD> >> /etc/wpa_supplicant.conf -``` -Enable the service: -``` -# ln -s /etc/sv/wpa_supplicant /var/service -# ln -s /etc/sv/dhcpcd /var/service -``` - -### Timezone -Install `tzdata`: -``` -# apkg -I tzdata -``` -Then create a symlink for your timezone to `/etc/localtime`: -``` -# ln -s /usr/share/zoneinfo/Asia/Kuala_Lumpur /etc/localtime -``` -Alternatively, you can copy it and then uninstall `tzdata` to keep your installed packages minimal: -``` -# cp /usr/share/zoneinfo/Asia/Kuala_Lumpur /etc/localtime -# apkg -r tzdata -``` - -### Reboot and enjoy! -Exit the chroot environment and unmount the Alice partition, then reboot: -``` -# exit -# umount /mnt/alice -# reboot -``` - -## Some important notes -- `Alice` uses `spm` and `apkg` as its package manager and package build system. Run with the `-h` flag to see available options. -- Additional scripts are provided with the name `apkg-<script>` which will be added (or removed) from time to time. -- Use `revdep` to scan for broken libraries and binaries after system upgrades and package removals. You can use `revdep -v` to print out missing required libraries, and use `apkg -f -u $(revdep)` to scan and rebuild broken packages. -- Run `updateconf` to update config files in `/etc` after package upgrades. |